| Display |
Sold Separately |
| Range |
3600' |
| Frequency |
Selectable |
Power
Output |
600 W or 1 kW |
Furuno's new BBFF3 high power, network sounder is
your key to finding more fish. This network fish
finder connects directly to a NavNet display or an
Ethernet hub with a single Ethernet cable. If it
is connected to an Ethernet hub that has multiple
displays attached, each of those displays will have
access to the fish finder features.
The unit itself can be configured as a 1, 2 or 3 kW RMS output, dual
frequency sounder. You may choose low frequency, high frequency or both
at the touch of a key and obtain detailed echoes of bottom structure
and fish using phased range scales up to 2,400 meters. It also utilizes
Furuno's Free Synthesizer (FFS) transceiver which means you can easily
select from a broad range of frequencies.
The BBFF3 turns any NavNet display into one of the
most powerful fish finders available on the market
today. And because it is being used on a NavNet display,
you can split the screen with other NavNet features
like: Radar, Chart Plotter, NavData and even Video,
depending on which NavNet unit you have.
Standard Features
- 1, 2 or 3 kW Optional Output Power set by internal
jumper
- Dual Frequency, Select two from 28, 38, 50, 88
or 200 kHz
- Furuno Free Synthesizer (FFS) Transceiver allows
easy selection of operating frequency
- 8 Range Scales to 3,600 feet
- Maximum Range Offset of 3,600 feet
- Audible/Visual Alarms for Bottom, Fish or Water
Temp. Changes*
- A-Scope Feature for Rapid Detection & ID
of Fish and Bottom Conditions
- Selectable Screen Colors, Including White on
color displays only
- A Variety of User Friendly Display modes
- Alphanumeric Displays of Vessel Speed, Water
Temp. & XTE **
- Automatic Depth Range & Gain Settings
- Range Scale Calibration in Feet, Fathoms or Meters
- Variable Range Marker & Target Simulator
Built-in
- Seven Settings of Picture Advance Speed & Minute
Markers
- Ethernet 10Base-T Network Protocol
- Six Levels of Signal Rejection Level & Noise
Limiter
Power
Requirements
* Optional Temperature Sensor Input Required
** Appropriate Nav data Input Required
|
