C-CHARGER® 5000 Series Marine Electronic Battery Chargers are the best choice for high-performance Marine UL listed products.
Utilizing high-quality components and corrosion-resistant, anodized aluminum housing, C-CHARGER® are built to last, performing in the toughest of marine environments.
Marine UL listing ensures durability and safety
* Only complete line of battery chargers approved by Marine UL's stringent specifications, testing and evaluation
*Tested for durability against static, impact, vibration and shock
*DC ammeter indicates the charge rate
*Ignition protected (USG-33 CFR 183.460b)
*AC and DC fuse protection
Multi-step charging with temperature compensation
*Restores up to 3 individual battery banks simultaneously
*Internal temperature compensation automatically adjusts output to precisely charge batteries according to ambient conditions
Corrosion resistant housing and components
*Constructed of tough, anodized aluminum housing that stands up to the elements-including extreme heat, humidity and salt air
*Circuit boards with UL recommended coatings provide the ultimate in environmental protection and hydrolyte stability-meets requirements of MIL-1-46058C
Run cool and quiet
*Cooling fan only operates during peak current demands
*Virtually no RFI or EMI interference exceeds FCC/Class B requirements
Easy to install and service
*Exterior slots for easy mounting
*Easy access to terminal connections and fuses
Models |
Input
Voltage |
Battery
Type |
4Hr.Bulk
Rate Output Voltage at 25°C |
Float
Rate
Output
Voltage
|
Bks
|
H
|
W
|
D
|
Wt
|
10
AMP Models |
93-24105E-A
|
120VAC*
|
Lead Acid
|
28.8VDC
|
27.0VDC
|
3 |
10.5"
|
9.5"
|
3.7"
|
8.5 lbs.
|
93-24105EG-A |
120VAC* |
Gel
|
28.0VDC
|
27.0VDC |
3
|
10.5"
|
9.5" |
3.7" |
8.5 lbs. |
20
AMP Models |
93-24205E-A
|
120VAC* |
Lead Acid
|
29.0VDC |
27.3VDC
|
3
|
13.25"
|
9.5"
|
3.7" |
9 lbs.
|
93-24205EG-A |
120VAC* |
Gel
|
28.2VDC |
27.3VDC
|
3 |
13.25" |
9.5" |
3.7" |
9 lbs. |
30
AMP Models |
93-24305E-A |
120VAC* |
Lead Acid |
29.0VDC |
27.3VDC |
3 |
15.25" |
9.5" |
3.7" |
10 lbs. |
93-24305EG-A
|
120VAC* |
Gel |
28.2VDC |
27.3VDC |
3 |
15.25" |
9.5" |
3.7" |
10 lbs. |
40
AMP Models |
93-24405E-A
|
120VAC* |
Lead Acid |
29.0VDC |
27.3VDC |
3 |
15.25"
|
9.5" |
3.7" |
10 lbs. |
93-24405EG-A |
120VAC* |
Gel |
28.2VDC |
27.3VDC |
3 |
15.25" |
9.5" |
3.7" |
10 lbs. |
50
AMP Models |
93-24505E-A |
120VAC* |
Lead Acid |
29.0VDC |
27.3VDC |
3 |
20"
|
9.5" |
3.7" |
20 lbs.
|
93-24505EG-A |
120VAC* |
Gel |
28.2VDC |
27.3VDC |
3 |
20" |
9.5" |
3.7" |
20 lbs. |
60
AMP Models |
93-24605E-A |
120VAC* |
Lead Acid |
29.0VDC |
27.3VDC |
3 |
21.5"
|
9.5" |
3.7" |
22 lbs.
|
93-24605EG-A |
120VAC* |
Gel |
28.2VDC |
27.3VDC |
3 |
21.5" |
9.5" |
3.7" |
22 lbs.
|
* Will accept variances in input voltage from 90 to 135 VAC
and variances in frequency from 45 to 65 Hz with no degradation of output.
**Will accept variances in input voltage from 180 to 270 VAC
and variances in frequency from 45 to 65 Hz with no degradation of output.
NOTE: These Models are 3 stage. Chargers remain at bulk rate until such time as the output is 50% of the rated amps at which time a four hour timer begins. After the timed period, the charger switches to the float rate at minimal amperage. Output voltage on these models are temperature compensated -.04 VDC/° C.
|
